Phoenix D385 Desiccant Dehumidifier

Phoenix D385 Desiccant Dehumidifier

The Phoenix D385 provides the perfect combination of features and performance for the restoration professional. Ingeniously designed to operate vertically or horizontally, the Phoenix D385 provides the wide operating range and ultra-low grains of a desiccant with the water removal capacity of the largest LGRs. The D385 delivers 385 CFM of ultra-low grain process air. The true four-hole configuration allows the D385 to be located in the affected area with the 75 CFM re-activation air stream isolated from the drying chamber. The four-hole design allows the restoration contractor to set up for effective positive, neutral or negative pressure operation. Designed to operate vertically or horizontally, the D385 will fit inside most crawlspaces. Having it securely inside, rather than outside the crawlspace, avoids the possibility of someone tampering with the unit. This product is also easy to transport and set up. It will fit in your truck in the areas already designed for your LGRs and will move on to the jobsite with the same portability. All the power to the unit is provided by two 115 volt grounded power cords. Simply plug the cords into separate 15 amp circuits. Each cord draws only 11 amps to power the D385. The re-activation air stream is ducted through 6" flex duct provided with the unit and stores conveniently in the top of the unit.

See it in action!
Video: Phoenix D385 Desiccant Dehumidifier

Dimensions: 24.25" W x 40" H x 21.375" D
Weight: 105 lbs

Upcoming Events
21 Mar 2018

OSSA Fall Protection

Edmonton, AB
21 Mar 2018

Confined Space Attendant/Entry Supervisor

Burnaby, BC
21 Mar 2018

Working at Heights Training (MB)

Winnipeg, MB
image description Watch our 3 minute video